How to remove car foot pads: Hot Topics and Disassembly Guide to the Whole Network
As the automobile supplies market continues to heat up, the discussion on automobile foot pads on the entire network has remained high recently. This article will combine popular topics in the past 10 days to analyze the removal methods of car foot pads in detail and provide structured data references.
1. The top 5 hot topics on car foot pads recently
| Ranking | Topic keywords | Discussion volume (10,000) | Main focus |
|---|---|---|---|
| 1 | Environmentally friendly foot mat | 28.6 | TPE vs Leather |
| 2 | Fully surrounded installation | 19.3 | Snap-type design |
| 3 | Feet mat smell | 15.8 | Formaldehyde emission |
| 4 | Special car | 12.4 | Model matching |
| 5 | Disassembly and clean | 9.7 | Convenient design |
2. Mainstream car foot pad types and removal methods
| Foot pad type | Fixed method | Demolition steps | Things to note |
|---|---|---|---|
| Snap type | Plastic buckle | 1. Lift the edge of the mat 2. Press the snap release button 3. Pull upward | Avoid vertical force |
| Velcro | Back adhesive bonding | 1. Start stripping from the corner 2. Keep the angle of 30° slowly tear it open | Residual glue stains can be removed with alcohol |
| Hook type | Metal hook | 1. Find the fixing point under the seat 2. Rotate hook 90° 3. Pull out | Pay attention to protecting the floor suede |
| All-enclosed | Multiple combination fixed | 1. Remove the door sill decor first 2. Release the seat side fixing belt 3. Finally, deal with the main mat | It is recommended that two people cooperate |
3. Detailed removal steps diagram
1.Preparation: Adjust the seat to the last position to ensure sufficient operating space. Prepare plastic spudger (avoid metal tools), gloves and flashlights.
2.Front seat mat removal:-Removing the fixing device at the accelerator/brake pedal first - gradually releasing the snap from the inside of the driving position to the outside of the driving position - Pay attention to the position of the original fixed hook
3.Rear seat mat removal:- You need to fold the seat cushion in the rear row first - Find the hidden buckle at the central passage - Use the removal order of "first middle and then both sides"
4. Frequently Asked Questions
| Problem phenomenon | Possible Causes | Solution |
|---|---|---|
| Clamping break | Excessive force/aging | Use special replacement buckles (available on Taobao) |
| Remaining glue marks | Low quality glue back | Wipe it with a hair dryer |
| Unable to reset | Deformation/displacement | Install after exposure to the sun and restore shape |
5. Professional advice
1. Regular removal and cleaning: It is recommended to remove it completely every 3 months to prevent accumulation of dust and corrosion of the floor.
2. Choose an easy-to-disassemble design: Pay attention to check the fixing method when purchasing, the knob-type snap-up is more durable than the pressing type.
3. Things to note in winter: The plastic buckle becomes brittle in low temperature environments, and it is recommended to operate in a warm environment.
4. Modification reminder: Car owners who install electric seats should pay special attention to the line avoidance, and it is recommended to disassemble them in a professional store.
Mastering the correct method of removing foot pads can not only extend the service life, but also ensure driving safety. It is recommended to bookmark this article and read the relevant chapters of the vehicle manual in full before actual operation. If you encounter special car models or complex situations, it is best to consult a professional in the 4S store.
check the details
check the details
en
